K4 Edge Release 6.5.2

Build 6.5.2 BL47

• Virtual IP configuration is allowed for static Interface IP configuration - This is to handle duplicate IPs on the system

• Interface screen reflecting the physical link properties even when virtual IP is configured

• Software upgrade / download related issues are fixed

• Read and publish the GPS data from Starlink (if enabled thru the starlink app)

• Pop Dropoff configuration is visible in the Interfaces screen on hover

• Captive Access Network - Login API is updated to include MAC address to detect the duplicate/repeat logins

Build 6.5.2 BL49

• Removed the restriction on Application Rules taking special characters and the domain name size restrictions

• Captive Access Network - Login API using the IP/MAC is fetched from DHCP reservation

Build 6.5.2 BL64 (not widely deployed - beta release for CAN)

• Captive Access Network -

  • With the restricted links, loading of user portal (cloud based) causes many failure. Hence the CAN User Portal UI along is moved to Edge. This is to provide better user experience in case of link failure or bad link conditions.

  • Allow specific device policy assignments to override CAN behavior on the Captive enabled Access network

• VSAT recovery is applicable only for K4 Managed configuration (W/o this change, if the VSAT modem is not passing traffic, but still showing IN-NETWORK, then every 15min the modem will be rebooted)

• Configuration Backup/Restore - Device Name is no longer saved during the configuration restore. And also, Site Name sync up will be done on the system reboot and whenever the first link is coming up to trigger the sync up as quickly as possible (instead of the 30min periodic sync)

• Virtual IP configuration had the issue of IP configuration , if the DHCP response has broadcast IP present - This will cause the probe to be deemed failure though the link is healthy.

• Bonded Speedtest if failed/stuck for some reason, the flag doesn’t get cleared properly. This is addressed in this release.

• Corrections on Traffic policy configuration and also the data format sync to the cloud (w/o this the client/Application data in service portal is empty)

Build 6.5.2 BL74

• Captive Access Network

  • Irrespective of the traffic policy configured, when auto redirect is enabled, redirect all traffic to captive portal

  • Edge Portal under Device Policies shows the CAN users uniquely. Also, allows traffic policy updated even for Access Network with CAN enabled.

  • CAN User portal returns the proper error codes on Inactivity Timer expiry

• K4 PEP recovery enhancements

• Broken Client Application Analysis report in SPORT and high drops on the telemetry data is corrected

• Edge Portal login screen flickering/ looping when login attempted from Sport is fixed

• Edge portal Usage Screen / Device summary sorting is fixed

Build 6.5.2 BL78

• 2FA on edge portal supported

• Konnect endpoint is changed behind cloudflare for security

• Content Filtering while using high cost link is fixed

• Client Data Usage report is corrected to exclude the local/multicast traffic

Build 6.5.2 BL80

• Captive Access Network- Support for Routed Network included

• Adv Bonding not using starlink in few scenarios because of multi home network is corrected

Build 6.5.2 BL89

• DNS fall thru with Content Filtering Enabled

• Captive WAN detection suppressed on VSAT WAN (viasat blocking K4 probes causing false positive)

• SW install/upgrade failure introduced in build 64 corrected - UI based SW upgrade will fail between build 64 to this build

• Config upload reporting “invalid file type” fixed

• Interface IP / duplicate IP or changed IP handling in case of namespace interfaces

Build 6.5.2 BL91 (current stable release)

• Correction for DPI Analytics exception - rarely seen

• UI Cache updates